# changelog

author: Pavol Sloboda <psloboda@redhat.com> - 3.0-1
changelog:
  - Initial commit conatining the clone of the rwarhide branch with a new
    source of postgresql 16.8 and the removal of Requires and BuildRequires
    of postgresql-server and postgresql-server-devel to get around the
    modularity of epel8 during build


author: Pavol Sloboda <psloboda@redhat.com> - 3.0-2
changelog:
  - Changed the filepath inside the lto_optimization patch since the target
    file cannot be found without using autosetup inside the spec file.


author: Pavol Sloboda <psloboda@redhat.com> - 3.0-3
changelog:
  - Added the necessary build for postgresql to acommodate the modularity of
    epel8 This means: * a minimal build of postgresql16 inside the build
    phase * "installation" of said builds files into a temporary dir
    (/tmp/pgsql) to ease it's deletion later * passing the pg_config files
    location as an rgument to the %make_build and %make_install of
    credcheck * creation of all the necessary directories since ppostgresql
    is located in a weird spot so they won't be created by it * moving all
    the necessary files of credcheck: - credcheck.control - credcheck.so -
    credcheck--%{version}.0.sql - credcheck--*--*.sql (the "update" files)
    to their proper place as they will be installed inside the dir that
    postgresql is in, this cannot be overriden using destdir or any other
    means known to me and is caused by the call of pgxs.mk provided by
    postgresql-server-devel inside the makefile of credcheck (the location of
    pgxs.mk can be found using: /usr/bin/pg_config --pgxs) * removing the
    installed files of postgresql16 (as mentioned above they are all in
    /tmp/pgsql)


author: Pavol Sloboda <psloboda@redhat.com> - 3.0-4
changelog:
  - Renamed the package to postgresql16-credcheck to make handling building
    for other versions of postgresql in the future easier.


author: Pavol Sloboda <psloboda@redhat.com> - 3.0-6
changelog:
  - This is a commit message for the previous commit I have unfortunately
    pushed a commit with an inclomplete commit message into the epel8 branch
    which does not allow force pushing, therefore a rebase is not possible so
    this empty commit only exists to amend that commit message: I have
    renamed the base package back to credcheck to keep the srpms called
    credcheck as well to work around the automatisation used in koji and mock
    builds, I have created a subpackage named
    postgresql%{postgres_major_version}-credcheck to be able to produce the
    correct output rpms and also renamed the selinux subpackage to
    postgresql%{postgresq_major_version}-credcheck-selinux to keep the
    naming consistent. This now allows me to build the package using koji
    without raising the "epel8 branch not requested for
    postgresql16-credcheck" error during the builds.


author: Pavol Sloboda <psloboda@redhat.com> - 3.0-7
changelog:
  - Updated the Requires and recommends between the main package and the
    selinux subpackage to reflect the rename


author: Pavel Raiskup <praiskup@redhat.com> 5.3-1
changelog:
  - orphanskill: log command line arguments of the terminated process
  - docs: migrate the community from IRC to Matrix
  - dnf5: don't output to a PTY (mail@evangoo.de)
  - new rpmautospec plugin (sgallagh@redhat.com, nils@redhat.com)
  - fix bash completion with multiple file arguments (orion@nwra.com)
  - only %prep once when running %generate_buildrequires multiple times (miro@hroncok.cz)
  - Dynamic BuildRequires: Prevent generation of unsatisfied dependency (miro@hroncok.cz)
  - Identify buildroot package management earlier (praiskup@redhat.com)
  - Dump also dnf5 info into logs


author: Pavel Raiskup <praiskup@redhat.com> 5.5-1
changelog:
  - allow chroot_scan to create archive instead of directory (tkopecek@redhat.com)
  - handle greedy options in Bash completion
  - fix root_cache invalidation (not) triggered by config changes
  - new '{{ repo_arch }}' Jinja2 template support
  - package_manager: disable %-interpolation in dnf.conf parser
  - only `chown` the in-chroot home files with the --rebuild mode
  - all non-privileged actions performed wiht EGID=135 (mock group)
  - mock newly requires a precise version of mock-filesystem
  - allow shadow-utils to run in buildroot by exception if necessary (martjack@redhat.com)
  - hw_info now reports file system type (vondruch@redhat.com)


author: Jakub Kadlcik <frostyx@email.cz> 5.6-1
changelog:
  - scm: Open stdout in text mode for Git timestamp subprocesses
    (fedora.dm0@gmail.com)
  - always set ownership of homedir (but not recursively) (msuchy@redhat.com)
  - Do not create temporary Buildroot.tmpdir for disabled nosync
    (praiskup@redhat.com)
  - bash-completion: add mock-parse-buildlog (pastalian46@gmail.com)
  - Rewrites "original_name" method to check if "cls" has a "backmap"
    (nikitych@yandex.ru)
  - Don't use --allowerasing for more DNF commands (frostyx@email.cz)
  - bash-completion: pre-build the list of mock known options
    (praiskup@redhat.com)
  - Avoid Traceback for resultdir ENOSPC (praiskup@redhat.com)
  - Post-release administrivia (praiskup@redhat.com)
  - Fix Version in %changelogs (praiskup@redhat.com)


author: Pavel Raiskup <praiskup@redhat.com> 5.7-1
changelog:
  - hermetic: new mode to do fully-offline builds
  - new --scrub-all-chroots option
  - make "dnf4" equivalent to "dnf"
  - chroot_scan: create result directory with appropriate permissions
  - chain: No need to re-create resultdir
  - de-duplicate the local-repo mountpoint in bootstrap
  - respect `nspawn_args` whenever `doChroot` is called
  - ensure --addrepo option also affects bootstrap
  - de-duplicate two opinionated doChroot() calls
  - show ccache stats at the end of the build (brian@interlinx.bc.ca)
  - add `debug` option to the ccache plugin (belegdol@fedoraproject.org)
  - add runtime dependency on fuse-overlayfs (frostyx@email.cz)
  - skip the "podman pull" for bootstrap when not needed
  - package_state: the installed_pkgs.log file now covers dynamic builddeps
  - don’t ship rpmautospec plugin with main package (nils@redhat.com)
  - clean up of macros referencing rhel7 (msuchy@redhat.com)
  - enable RPM sysusers integration (j1.kyjovsky@gmail.com)
  - add hashdir option to ccache plugin (belegdol@fedoraproject.org)
  - own /usr/share/doc/mock (msuchy@redhat.com)


author: Pavel Raiskup <praiskup@redhat.com> 5.8-1
changelog:
  - chroot_scan: make sure the tarball is owned by non-priv user
  - chroot_scan: use util.do to display command in --verbose
  - chroot_scan: correctly create the result directory


author: Pavel Raiskup <praiskup@redhat.com> 6.0-1
changelog:
  - export_buildroot_image: new plugin for OCI image exports
  - buildroot_image: allow using OCI images as the base for buildroot
  - hermetic: do not install buildroot via DNF
  - podman: typofix in library call error-message
  - use new digest for comparing podman images (tkopecek@redhat.com)
  - hermetic: do "podman pull" instead of "podman load" for bootstrap
  - podman: always tag/untag the images we work with locally
  - podman: generalize the logic so it is not bootstrap-only
  - avoid using the %pre scriptlet if possible
  - hermetic: retry on failed network requests (rbean@redhat.com)
  - hermetic: more robust retry mechanism for downloading rpms (tkopecek@redhat.com)
  - chroot_scan: bugfix - create chroot_scan/ correctly in buildroot.resultdir
  - mock: drop the unused create_default_route_in_container.sh script
  - mock: make --dnf-cmd compatible with DNF5 (frostyx@email.cz)
  - mock: add a real source URL into %Source
  - the dnf_builddep_opts made working again (addisu@openrobotics.org)


author: Miroslav Suchý <msuchy@redhat.com> 6.1-1
changelog:
  - bootstrap: automatically bind-mount local --additional-package
    (praiskup@redhat.com)
  - tests: do not try to build mock.src.rpm against navy-* (praiskup@redhat.com)
  - hermetic: more image-pedantic work with bootstrap (praiskup@redhat.com)
  - doc: --config-opts single-item array wants second to be blank
    (mail@evangoo.de)


author: Pavel Raiskup <praiskup@redhat.com> 6.2-1
changelog:
  - disable copying ca-trust dirs with Azure Linux 3 (reubeno@users.noreply.github.com)
  - bail clearly when image pull fails (awilliam@redhat.com)


author: Pavel Raiskup <praiskup@redhat.com> 41.1-1
changelog:
  - branch F41 from Rawhide (frostyx@email.cz)
  - added centos-stream+epel-10 configs
  - Enable RPM sysusers integration (j1.kyjovsky@gmail.com)
  - Rawhide to accept GPG key from future Fedora Rawhide+1
  - openEuler 24.03 LTS (nucleo@fedoraproject.org)
  - drop fedora-eln-i386 (yselkowi@redhat.com)
  - Switch CentOS 7 to vault.centos.org (robert@fedoraproject.org)
  - Fix GPG keys for CentOS Stream 10 repositories (daan.j.demeyer@gmail.com)
  - EOL epel-7 configuration
  - CentOS 7 is EOL
  - Fedora 41+ configuration images are "dnf5 ready"
  - Use metalinks for c10s {baseos,appstream,crb}-{source,debuginfo} (miro@hroncok.cz)


author: Pavel Raiskup <praiskup@redhat.com> 41.3-1
changelog:
  - move anolis-7 to eol directory (msuchy@redhat.com)
  - move opensuse-leap-15.4 to eol directory (msuchy@redhat.com)
  - configs: the stream9 image is "ready" for Mock bootstrap
  - enable bootstrap container for CentOS Stream 10 (carlwgeorge@gmail.com)
  - configs: replace `powerpc64le` with `ppc64le` in the `%_host_cpu` macro
  - fix EOL template locations for CentOS7/EPEL7 (thomas.mendorf@ebf.com)


author: Pavel Raiskup <praiskup@redhat.com> 41.5-1
changelog:
  - Fedora 39 EOL
  - fix openSUSE-tumbleweed update failure during the second build (duli4868@gmail.com)
  - use non development bootstrap image for CentOS Stream 10 (romain.geissler@amadeus.com)
  - remove ELN ResilientStorage repos (yselkowi@redhat.com)
  - update ELN bootstrap image (yselkowi@redhat.com)
  - Add epel and epel-testing repos to the EPEL 10 config (carlwgeorge@gmail.com)


author: Miroslav Suchý <msuchy@redhat.com> 42.2-1
changelog:
  - fix: expand Oracle Linux distro_id from ol to oraclelinux
    (avi.miller@oracle.com)
  - Navy Linux 8 configuration fixes (adil@linux.com)
  - EuroLinux end-of-life (praiskup@redhat.com)
  - bugfix: upgrade openeuler chroots to latest release and fix gpg check failed
    in 20.03 (pkwarcraft@gmail.com)
  - Add Azure Linux 3 configuration (negativo17@gmail.com)
  - Add Azure Linux 2 configuration (negativo17@gmail.com)
  - Add Kylin 10 configuration files (negativo17@gmail.com)
  - Add AlmaLinux Kitten 10 + EPEL 10 configs (ngompa@almalinux.org)
  - Add AlmaLinux Kitten 10 configs (ngompa@almalinux.org)
  - Add openSUSE Leap 15.6, move openSUSE Leap 15.5 to eol (negativo17@gmail.com)


author: Pavel Raiskup <praiskup@redhat.com> 42.3-1
changelog:
  - Fedora 40 EOL
  - Add RHEL 10 template and configs (carlwgeorge@gmail.com)
  - disable copying ca-trust dirs with Azure Linux 3 (reubeno@users.noreply.github.com)
  - Add epel-z-10 template (carlwgeorge@gmail.com)
  - Update Azure Linux configurations (scaronni@nvidia.com)
  - make opensuse-leap-15.5.tpl eol
  - fix the leap image reference to 15.6


author: Peter Bieringer <pb@bieringer.de> - 3.5.0-1
changelog:
  - Update to 3.5.0
  - Bundle InfCloud 0.13.1 with dedicated sub packages
  - Add sysusers.d config file to allow rpm to create users/groups automatically (>= F43|EL11)


author: Peter Bieringer <pb@bieringer.de> - 3.5.2-1
changelog:
  - Add support for optional environment file /etc/sysconfig/radicale
  - Package template for /etc/sysconfig/radicale
  - Update to 3.5.2


author: Zygmunt Krynicki <me@zygoon.pl>
changelog:
  - Re-cherry pick fix for SELinux timedatex problem from upstream
    as it was not released in 2.66.1, sorry.


author: Ernest Lotter <ernest.lotter@canonical.com>
changelog:
  - New upstream release 2.67.1
   - Fix apparmor permissions to allow snaps access to kernel modules
     and firmware on UC24, which also fixes the kernel-modules-control
     interface on UC24
   - AppArmor prompting (experimental): disallow /./ and /../ in path
     patterns
   - Fix 'snap run' getent based user lookup in case of bad PATH
   - Fix snapd using the incorrect AppArmor version during undo of an
     refresh for regenerating snap profiles
   - Add new syscalls to base templates
   - hardware-observe interface: allow riscv_hwprobe syscall
   - mount-observe interface: allow listmount and statmount syscalls


author: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
changelog:
  - The changelog date and author have been modified to maintain linearity.
  - Drop 0001-data-selinux-remove-timedatex.patch - applied upstream.
  - New upstream release 2.67
   - AppArmor prompting (experimental): allow overlapping rules
   - Registry view (experimental): Changes to registry data (from both
     users and snaps) can be validated and saved by custodian snaps
   - Registry view (experimental): Support 'snapctl get --pristine' to
     read the registry data excluding staged transaction changes
   - Registry view (experimental): Put registry commands behind
     experimental feature flag
   - Components: Make modules shipped/created by kernel-modules
     components available right after reboot
   - Components: Add tab completion for local component files
   - Components: Allow installing snaps and components from local files
     jointly on the CLI
   - Components: Allow 'snapctl model' command for gadget and kernel
     snaps
   - Components: Add 'snap components' command
   - Components: Bug fixes
   - eMMC gadget updates (WIP): add syntax support in gadget.yaml for
     eMMC schema
   - Support for ephemeral recovery mode on hybrid systems
   - Support for dm-verity options in snap-bootstrap
   - Support for overlayfs options and allow empty what argument for
     tmpfs
   - Enable ubuntu-image to determine the size of the disk image to
     create
   - Expose 'snap debug' commands 'validate-seed' and 'seeding'
   - Add debug API option to use dedicated snap socket /run/snapd-
     snap.socket
   - Hide experimental features that are no longer required
     (accepted/rejected)
   - Mount ubuntu-save partition with no{exec,dev,suid} at install, run
     and factory-reset
   - Improve memory controller support with cgroup v2
   - Support ssh socket activation configurations (used by ubuntu
     22.10+)
   - Fix generation of AppArmor profile with incorrect revision during
     multi snap refresh
   - Fix refresh app awareness related deadlock edge case
   - Fix not caching delta updated snap download
   - Fix passing non root uid, guid to initial tmpfs mount
   - Fix ignoring snaps in try mode when amending
   - Fix reloading of service activation units to avoid systemd errors
   - Fix snapd snap FIPS build on Launchpad to use Advantage Pro FIPS
     updates PPA
   - Make killing of snap apps best effort to avoid possibility of
     malicious failure loop
   - Alleviate impact of auto-refresh failure loop with progressive
     delay
   - Dropped timedatex in selinux-policy to avoid runtime issue
   - Fix missing syscalls in seccomp profile
   - Modify AppArmor template to allow using SNAP_REEXEC on arch
     systems
   - Modify AppArmor template to allow using vim.tiny (available in
     base snaps)
   - Modify AppArmor template to add read-access to debian_version
   - Modify AppArmor template to allow owner to read
     @{PROC}/@{pid}/sessionid
   - {common,personal,system}-files interface: prohibit trailing @ in
     filepaths
   - {desktop,shutdown,system-observe,upower-observe} interface:
     improve for Ubuntu Core Desktop
   - custom-device interface: allow @ in custom-device filepaths
   - desktop interface: improve launch entry and systray integration
     with session
   - desktop-legacy interface: allow DBus access to
     com.canonical.dbusmenu
   - fwupd interface: allow access to nvmem for thunderbolt plugin
   - mpris interface: add plasmashell as label
   - mount-control interface: add support for nfs mounts
   - network-{control,manager} interface: add missing dbus link rules
   - network-manager-observe interface: add getDevices methods
   - opengl interface: add Kernel Fusion Driver access to opengl
   - screen-inhibit-control interface: improve screen inhibit control
     for use on core
   - udisks2 interface: allow ping of the UDisks2 service
   - u2f-devices interface: add Nitrokey Passkey


author: Ernest Lotter <ernest.lotter@canonical.com>
changelog:
  - New upstream release 2.68
   - FDE: add support for new and more extensible key format that is
     unified between TPM and FDE hook
   - FDE: add support for adding passphrases during installation
   - FDE: update secboot to 30317622bbbc
   - Snap components: make kernel components available on firstboot
     after either initramfs or ephemeral rootfs style install
   - Snap components: mount drivers tree from initramfs so kernel
     modules are available in early boot stages
   - Snap components: support remodeling to models that contain
     components
   - Snap components: support offline remodeling to models that contain
     components
   - Snap components: support creating new recovery systems with
     components
   - Snap components: support downloading components with 'snap
     download' command
   - Snap components: support sideloading asserted components
   - AppArmor Prompting(experimental): improve version checks and
     handling of listener notification protocol for communication with
     kernel AppArmor
   - AppArmor Prompting(experimental): make prompt replies idempotent,
     and have at most one rule for any given path pattern, with
     potentially mixed outcomes and lifespans
   - AppArmor Prompting(experimental): timeout unresolved prompts after
     a period of client inactivity
   - AppArmor Prompting(experimental): return an error if a patch
     request to the API would result in a rule without any permissions
   - AppArmor Prompting(experimental): warn if there is no prompting
     client present but prompting is enabled, or if a prompting-related
     error occurs during snapd startup
   - AppArmor Prompting(experimental): do not log error when converting
     empty permissions to AppArmor permissions
   - Confdb(experimental): rename registries to confdbs (including API
     /v2/registries => /v2/confdb)
   - Confdb(experimental): support marking confdb schemas as ephemeral
   - Confdb(experimental): add confdb-control assertion and feature
     flag
   - Refresh App Awareness(experimental): LP: #2089195 prevent
     possibility of incorrect notification that snap will quit and
     update
   - Confidential VMs: snap-bootstrap support for loading partition
     information from a manifest file for cloudimg-rootfs mode
   - Confidential VMs: snap-bootstrap support for setting up cloudimg-
     rootfs as an overlayfs with integrity protection
   - dm-verity for essential snaps: add support for snap-integrity
     assertion
   - Interfaces: modify AppArmor template to allow owner read on
     @{PROC}/@{pid}/fdinfo/*
   - Interfaces: LP: #2072987 modify AppArmor template to allow using
     setpriv to run daemon as non-root user
   - Interfaces: add configfiles backend that ensures the state of
     configuration files in the filesystem
   - Interfaces: add ldconfig backend that exposes libraries coming
     from snaps to either the rootfs or to other snaps
   - Interfaces: LP: #1712808 LP: 1865503 disable udev backend when
     inside a container
   - Interfaces: add auditd-support interface that grants audit_control
     capability and required paths for auditd to function
   - Interfaces: add checkbox-support interface that allows
     unrestricted access to all devices
   - Interfaces: fwupd | allow access to dell bios recovery
   - Interfaces: fwupd | allow access to shim and fallback shim
   - Interfaces: mount-control | add mount option validator to detect
     mount option conflicts early
   - Interfaces: cpu-control | add read access to /sys/kernel/irq/
   - Interfaces: locale-control | changed to be implicit on Ubuntu Core
     Desktop
   - Interfaces: microstack-support | support for utilizing of AMD SEV
     capabilities
   - Interfaces: u2f | added missing OneSpan device product IDs
   - Interfaces: auditd-support | grant seccomp setpriority
   - Interfaces: opengl interface | enable parsing of nvidia driver
     information files
   - Allow mksquashfs 'xattrs' when packing snap types os, core, base
     and snapd as part of work to support non-root snap-confine
   - Upstream/downstream packaging changes and build updates
   - Improve error logs for malformed desktop files to also show which
     desktop file is at fault
   - Provide more precise error message when overriding channels with
     grade during seed creation
   - Expose 'snap prepare-image' validation parameter
   - Add snap-seccomp 'dump' command that dumps the filter rules from a
     compiled profile
   - Add fallback release info location /etc/initrd-release
   - Added core-initrd to snapd repo and fixed issues with ubuntu-core-
     initramfs deb builds
   - Remove stale robust-mount-namespace-updates experimental feature
     flag
   - Remove snapd-snap experimental feature (rejected) and it's feature
     flag
   - Changed snap-bootstrap to mount base directly on /sysroot
   - Mount ubuntu-seed mounted as no-{suid,exec,dev}
   - Mapping volumes to disks: add support for volume-assignments in
     gadget
   - Fix silently broken binaries produced by distro patchelf 0.14.3 by
     using locally build patchelf 0.18
   - Fix mismatch between listed refresh candidates and actual refresh
     due to outdated validation sets
   - Fix 'snap get' to produce compact listing for tty
   - Fix missing store-url by keeping it as part of auxiliary store
     info
   - Fix snap-confine attempting to retrieve device cgroup setup inside
     container where it is not available
   - Fix 'snap set' and 'snap get' panic on empty strings with early
     error checking
   - Fix logger debug entries to show correct caller and file
     information
   - Fix issue preventing hybrid systems from being seeded on first
     boot
   - LP: #1966203 remove auto-import udev rules not required by deb
     package to avoid unwanted syslog errors
   - LP: #1886414 fix progress reporting when stdout is on a tty, but
     stdin is not


author: Ernest Lotter <ernest.lotter@canonical.com>
changelog:
  - New upstream release 2.68.2
   - FDE: use boot mode for FDE hooks
   - FDE: add snap-bootstrap compatibility check to prevent image
     creation with incompatible snapd and kernel snap
   - FDE: add argon2 out-of-process KDF support
   - FDE: have separate mutex for the sections writing a fresh modeenv
   - FDE: LP: #2099709 update secboot to e07f4ae48e98
   - Confdb: support pruning ephemeral data and process alternative
     types in order
   - core-initrd: look at env to mount directly to /sysroot
   - core-initrd: prepare for Plucky build and split out 24.10
     (Oracular)
   - Fix missing primed packages in snapd snap manifest
   - Interfaces: posix-mq | fix incorrect clobbering of global variable
     and make interface more precise
   - Interfaces: opengl | add more kernel fusion driver files


author: Ernest Lotter <ernest.lotter@canonical.com>
changelog:
  - New upstream release 2.68.3
   - FDE: LP: #2101834 snapd 2.68+ and snap-bootstrap <2.68 fallback to
     old keyring path
   - Fix Plucky snapd deb build issue related to /var/lib/snapd/void
     permissions
   - Fix snapd deb build complaint about ifneq with extra bracket


author: Maciek Borzecki <maciek.borzecki@gmail.com> - 2.68.3-1
changelog:
  - Revert upstream patch dropping timedatex from SELinux policy of snapd
   - Fixes: https://bugs.launchpad.net/snapd/+bug/2097170


author: Richard W.M. Jones <rjones@redhat.com> - 7.0.7-2
changelog:
  - Rebuild for Jansson 2.14
    (https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/thread/3PYINSQGKQ4BB25NQUI2A2UCGGLAG5ND/)


